After I got the engine and transmission installed in the frame, it’s time to add the swing arm and the rear drive. Here is the write-up I did for this part of the project.
And, you can find the write-ups for the engine and transmission installation work here:
Here are some of the pictures from the write-up.
Rear of Transmission with Drive Shaft Coupling (Upper Right) and Frame Protection
Powder Coated Swing Arm with Drive Shaft Inside
Swing Arm Pivot Pins, Lock Nuts and Plastic Caps
Swing Arm Boot – “OB” EN (Top) on Round Section
Measuring Swing Arm Gap to Center the Swing Arm
Sitting on Rear Tire to Tighen Drive Shaft Bolts
Swing Arm and Rear Drive Installed