This bit of work finishes up the rear end until I install the fenders and seat. Those will wait for me to strip and paint the body work.
Here is a write-up on this work.
The key lock and seat latch can be confusing to get in, so I took some extra pictures of the assembly process.
Here’s a couple pictures from the write-up.
Rear Sub-Frame, Upside Down
Marking on Right Shock Pre-Load Adjuster
Securing Shocks by Lower Shackle
Right Side Sub-Frame Bolts Installed
Key Lock and Seat Latch Hardware
Attaching Lock Retaining Ring with Screw
Here is the rear end of the bike when I disassembled it.
Rear End Disassembly
Rear End Dissassembly
And how it looks now. Major improvement 🙂
Final Product
Key Lock and Grab Handle Installed