1983 BMW R100RS Remove Electrical System

After I removed the fairing and rear fender assembly, I removed the electrical system including the main and sub wiring harnesses and the electrical components attached to the frame.

As I did this work, I put together a video tour of the electrical system.

VIDEO: Remove Electrical Wiring & Components

And, you can read all about how I did this work here.

Here are a couple pictures from this document.

Main Harness Zip Tie Location

Main Harness Zip Tie Location

Location of Clutch Switch and Front Brake Switch Sub-harness Connectors

Location of Clutch Switch and Front Brake Switch Sub-harness Connectors

Main Harness Leads Near Left Coil

Main Harness Leads Near Left Coil

Ignition Module with Connector On Top of Front Brake Manifold

Ignition Module with Connector On Top of Front Brake Manifold

Main Wiring Harness Removed

Main Wiring Harness Removed

2 thoughts on “1983 BMW R100RS Remove Electrical System

  1. Thank you for taking the time to document , explain , and provide tips and tricks. I truly enjoy reading your articles. Your time and effort is greatly appreciated and your knowledge is greatly respected.
    Roberto
    1973 r75/5 LAB German version
    1984 r100rs US model

Leave a Reply to Roberto Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.